The method of drill and fill aerification could not be more different from that of the old fashioned aeration process. Using the drill and fill technique, the soil is actually changed. The soil is removed and helpful nutrients are put in its place. The process gets rid of the harmful gases stuck in the ground, increases root depths and stimulates root growth.

Once the soil is removed, replacing it with blended nutrients will improve the quality of the green. Using dried materials, the hole is totally filled. The green will not sink and the hole is covered. After drill and fill, games can restart immediately.

The method of drill and fill aerification releases tension caused by compaction in the subsoil. It also provides the quickest healing time and improvements to drainage. Old fashioned aerators rip apart the turf into grass plugs. This is very damaging to the surface, and is followed by a labor heavy clean-up. Not to mention the long process of healing. Play in this condition would be impossible. Another drawback is the fact that the root of the problems which lie in the soil are not fixed.

Drill and fill aerification can be done at any time. Frozen ground is the only time it is not possible. The process applies a small amount of pressure, much less than the average damage caused by normal usage. It is possible to complete aerification even during high amounts of traffic and stress.

With this process, no ragging, ripping, or tearing happens. More green is left around the edges of the drill site. Once the ground has been brushed and and then rolled, the hole simply sticks closed. These are significant aids to the healing process. Within days, it will be impossible to see where aerification has taken place.

During this process, holes are drilled and filled at the same time. This causes a small amount of extra soil and nutrients. The extra soil is brought to the top instead of being pushed to the edges of the hole. More soil is removed and this presents a cleaner hole. Small amounts of soil that is brought up to the green can easily be whipped, shoveled, blown, or brushed away. Due to its fine texture, it could be left on the surface.

New machines are lighter, faster, and much simpler to operate. Aerification can be done to tee boxes, driving ranges, fairways, and greens. The gentle operating action keep your valuable greens in their best condition. Drill and fill aerification has changed the way greens are maintained, eliminating problems like those found with conventional methods, and it the best solution for fixing old and even new greens alike.

Looking to find the single source of helpful information on drill and fill aerification?